Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
- 13. Body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. Front bumper
   13.6. Rear bumper
   13.7. Replacement of a headlight and index of turns
   13.8. Replacement of a back lamp
   13.9. Replacement of a forward wing
   13:10. Cowl
   13:11. Cowl lock cable
   13:12. Cowl lock
   13:13. Replacement of the forward panel
   13:14. Doors
   13:15. Door upholstery
   13:16. Lock and handles of opening of a door
   13:17. Glasses of doors
   13:18. Trunk lid (Sedan models)
   13:19. Lock of a trunk lid (Sedan model)
   13:20. Back door (model of Kombi)
   13:21. Lock of a back door (model of Kombi)
   13:22. Central blocking
   13:23. Power windows
   13:24. External rear-view mirrors
   13:25. Front and back flew down
   13:26. Hatch
   13:27. Removable elements of a body
   13:28. Seats
   13:29. Seat belts
   13:30. Finishing of salon
   13:31. Ceiling upholstery
   13:32. Central console
   13:33. Dashboard
+ 14. Electric equipment


e1bd1949



13:30. Finishing of salon

CASINGS OF THE STEERING COLUMN

Removal

PERFORMANCE ORDER
1. To remove a negative wire from the accumulator.
2. On models with a steering column with an adjustable inclination to move the column regulator lever to the released situation.
3. Working under a steering column, to unscrew five screws of fastening.
4. Then to remove the lower casing of a steering column.
5. To disconnect sockets from the regulator of illumination of the dashboard, the switch of remote control of the radio receiver, the switch a cruise control and the signaling electronic control device.
6. To remove the top casing from a steering column.

Installation

Installation is made in the sequence, the return to removal.

WARE BOX (MODELS TILL 1992)

Removal

PERFORMANCE ORDER
1. Under a ware box to take two hinged fingers, using the thin screw-driver.
2. To unscrew two screws fixing a back part of a cover and to uncover.

Installation

Installation is made in the sequence, the return to removal.

WARE BOX (MODELS SINCE 1993)

Removal

PERFORMANCE ORDER
1. Under a ware box to take two hinged fingers, using the thin screw-driver.
2. To release a latch of a ware box and to take a ware box from the panel.

Installation

Installation is made in the sequence, the return to removal.

CARPETS

The carpet in interior of the car consists of one part and is fixed on edge by screws and percussion caps.

Removal and installation of a carpet are very labor-consuming because it is necessary to remove all adjacent finishing of salon: seats, central console and seat belts.


On the homepage