Peugeot 405

1987-1997 of release

Repair and operation of the car



Peugeot 405
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engines
+ 4. Fuel system
+ 5. Lubrication systems, coolings
+ 6. System of release
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Steering
+ 11. Suspension brackets
+ 12. Brake system
- 13. Body
   13.1. Care of a body
   13.2. Care of an upholstery and rugs
   13.3. Repair of insignificant damages of a body
   13.4. Repair of strong damages of a body
   13.5. Front bumper
   13.6. Rear bumper
   13.7. Replacement of a headlight and index of turns
   13.8. Replacement of a back lamp
   13.9. Replacement of a forward wing
   13:10. Cowl
   13:11. Cowl lock cable
   13:12. Cowl lock
   13:13. Replacement of the forward panel
   13:14. Doors
   13:15. Door upholstery
   13:16. Lock and handles of opening of a door
   13:17. Glasses of doors
   13:18. Trunk lid (Sedan models)
   13:19. Lock of a trunk lid (Sedan model)
   13:20. Back door (model of Kombi)
   13:21. Lock of a back door (model of Kombi)
   13:22. Central blocking
   13:23. Power windows
   13:24. External rear-view mirrors
   13:25. Front and back flew down
   13:26. Hatch
   13:27. Removable elements of a body
   13:28. Seats
   13:29. Seat belts
   13:30. Finishing of salon
   13:31. Ceiling upholstery
   13:32. Central console
   13:33. Dashboard
+ 14. Electric equipment


e1bd1949



13:20. Back door (model of Kombi)

BACK DOOR

Removal

PERFORMANCE ORDER
1. To open a back door.
2. To unscrew screws of fastening and to remove plastic finishing from an internal part of a back door.
3. Working around edge of carpet finishing, to release brackets of fastening and to remove carpet finishing.
4. To disconnect electric sockets from the luggage carrier illumination switch.
5. Through openings in a back door to disconnect sockets of the engine of a screen wiper of a back door and the engine of the central blocking.
6. To remove a washer hose from a nozzle.
7. To release plaits of wires and a hose of a washer from fastening brackets in a back door.
8. To remove sealing rings from the top corners of a back door.
9. If the back door is repeatedly established, then before extraction of wires and hoses from a door to tie to them a strong cord and after extraction of wires to leave a cord at doors.
10. To support a back door, then by means of the lever to remove racks of support of a door in open situation from spherical hinged connections on a back door.
11. To unscrew nuts (are specified by shooters), the fixing hinges to the top part of a back door and to remove a back door from the car.

Installation

PERFORMANCE ORDER
1. Installation is made in the sequence, the return to removal, taking into account the next moments.
2. If the back door repeatedly is established, then after installation of a door to tie a strong cord which remained at doors after extraction of wires to wires and hoses, then to tighten wires and hoses at a door.
3. If it is necessary, to adjust rubber pillows for the correct closing of a door.
4. Before installation of finishing of a back door to check and if it is necessary, to adjust position of the lock of a back door.

RACKS OF SUPPORT OF THE BACK DOOR

Removal

PERFORMANCE ORDER
1. To support a back door in open situation.
2. By means of the lever to remove racks of support of a door in open situation from spherical hinged connections on a back door.
3. To similarly remove racks of support of a door in open situation from spherical hinged connections on a body.

Installation

Installation is made in the sequence, the return to removal.

On the homepage